It uses 70% less electricity compared to conven-tional water heating solutions. It uses electricity only to move heat from one place to another instead of using it to generate heat. This result in 70% less electricity consumption. Air to water heat pumps absorb hot energy from the air freely, while the electricity is only used to drive the compressor to pump up the heat from the air, so they consume just a quarter of power of traditional electric water heaters, saving a lot of electric cost for users.
A Heat pump is a little like a reverse refrigerator. It transfers the heat in the air outside of the unit to the water stored inside the heater through a heat exchange system. In the case of Heat pumps, heat is a relative term as they will still work in very cold conditions – at least -10oC, so it will still be generating hot water for you during winter nights.
Waaree Solar Thermal LLP make AHWS system can be installed in Bathroom, Balcony, Kitchen, Storeroom, Terrace etc. virtually anywhere in the house.
A 100-litre system, the average size of a household of 3 - 4 people, can prevent emissions of 0.4 to 1.0 tonnes of carbon dioxide per year. The reduction in emissions of carbon dioxide (one of the major greenhouse gases) can positively help in slowing down the pace of global warming. By using air source energy and electric power, there is no harmful gas being discharged during the operation of heat pumps. R410A refrigerant guarantees fluoride-free emission.
a. Air Source - Inexpensive to install and commonly used, air source heat pumps function well in moderate climates, using outside air as a medium for heat exchange.
b. Water Source - Water source heat pumps dissipate heat by way of water instead of air. They require well, lake, or other water source access, and aren’t as common.
c. Ground Source - Ground source or geothermal heat pumps take advantage of thermal energy stored underground, transferring heat in a similar manner to air source heat pumps. Due to the constant temperature of the ground, they offer much more efficient operation, however installation is pricier and more complicated due to the need for excavation and installation of underground piping.
There is various application for the system, as it can be used for household activities, Bathing, Swimming pool etc
There is some maintenance that the owner can do himself It includes keeping the whole apparatus clean while the condition of some technical parts needs to be checked by a skilled technician. It is advisable to have the device checked every year in order to keep track of possible issues that could arise.
Waaree Solar Thermal LLP AHWS system generates hot water 24 x 7 and all days and in all seasons of the year.
The average lifespan of a Heat pump is 15 to 20 years if they are constantly being monitored and preventive maintenance is performed.
Usually, the process is completed within 3 days, as you need to install an outdoor unit and an indoor one in place of the device previously used. For a ductless system, it may take just one day while it takes longer for ground source heat pumps, especially if you need to dig a borehole.
the Heat pump dehumidifies in cooling mode and in the heating mode, such a function is not needed as the water circulating through the pipes removes the humidity.
The more often you clean the Heat pump, will give better the performance in reducing inefficiencies and power squandering. It is advisable to make sure that no dust, leaves, or other materials clang up the ducts, and to clean the apparatus every two weeks.
the heat exchange allows the system to work. The heat pump extracts heat from the outside through an outdoor heat exchanger coil and it transfers it into the system ducts through an indoor heat exchanger coil.
Only soft and potable water. If you use hard water then we have system with special jacket type heat exchanger or with sof
Galvanized steel pipes of class "B" for cold water line & precast PUF insulated. HDPE Pipe with "B" class Galvanized pipes for Hot Water Lines
There is no need be worried about as this means that the heat pump is in the defrost cycle. The outdoor fan stops to increase the temperature and ease the ice melting while the Heat pump switches to the conditioning mode, acting as a condenser.
No, Heat pumps are not noisier than a boiler and many other appliances we use in our day to day life.
Heat pumps are eco – friendly as they reduce the CO2 emission to the environment.
The maximum possible temperature could be attained by AHWS system is about 60º C to 80º C.
Maintenance is negligible
- Periodic glass cleaning
- Check for leakages and valve functioning, if any.
For example, if water flow is not enough in the system, the system will show high pressure protection and stop the heat pump automatically to protect the compressor from being damaged. Also, there is high current protection: if the power supply is not stable, the heat pump will show the high current error to stop the heat pump and avoid compressor damage.
Copeland scroll compressor, Danfoss electronic expansion valve, Eaton AC contactor and thermal relay as well as other brand components of the heat pump guarantee high product quality and a long lifespan. All of our screws and clips (both external and internal) are stainless steel. The cabinet we are using is made up of GALVANIZED STEEL, making the product more rust resistant and durable.
© Copyright 2025 All rights reserved | Design & Developed By FossTechUzon